|
VN 150-1200 - M Series
Specifications
(06/02/10) |
|
Part No |
Quant |
Description |
System: |
933569 |
|
Model VN-150-2" Simplex (SX) Water Softener |
Mineral Tank: |
100123-LC |
1 |
20x54 Carbon steel, epoxy lined and coated, 100-psi, non-code
vessels |
Upper distributor: |
100341 |
1 |
2"
Single point upper SCH80PVC |
Lower distributor: |
500000-1 |
1 |
Two point - 2" lower SCH80PVC |
Face Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi
Cast Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-10 |
1 |
2"
Galvanized Flow Control Assembly - 10 gpm |
Media (Resin / gravel): |
479922 |
1 |
5
ft³ / 100 lb per vessel |
Rated continuous / peak flow: |
QVN150S2 |
- |
50
/ 75 gpm per vessel |
Capacity: |
CAP150S |
- |
153,000 grains per vessel |
Brine Tank: |
805076 |
1 |
24X40 Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine Injector Assembly: |
320400-1 |
1 |
3/4" Injector (white) External - Brine line by others |
Brine Line Assembly: |
806694 |
1 |
3/4" includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN
SX Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN150S |
- |
98
1/2" x 59" x 138” |
- |
ADDVN |
- |
Add one foot to height for loading media. |
Shipping Weight: |
WTVN150S |
- |
859 lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be
mounted on the NEMA 4 fiberglass control box with the stager and
shall initiate regeneration at certain, preset times. Manual
regeneration shall be available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933569-11 |
|
Model
VN-150-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100123-LC |
2 |
20x54
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels |
Upper
distributor: |
100341 |
2 |
2"
Single point upper SCH80PVC |
Lower
distributor: |
500000-1 |
2 |
Two
point - 2" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-10 |
2 |
2"
Galvanized Flow Control Assembly - 10 gpm |
Media
(Resin / gravel): |
479922 |
2 |
5 ft³
/ 100 lb per vessel |
Rated
continuous / peak flow: |
QVN150T2 |
- |
50 /
75 gpm per vessel : 100 / 150 gpm both vessels |
Capacity: |
CAP150T |
- |
153,000 grains per vessel : 306,000 grains both vessels |
Brine
Tank: |
805076 |
1 |
24X40
Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-1 |
1 |
3/4"
Injector (white) External - Brine line by others |
Brine
Line Assembly: |
806694 |
2 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN150T |
- |
98
1/2" x 59" x 138” |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN150T |
- |
1661
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933570 |
|
Model
VN-180-2" Simplex (SX) Water Softener |
Mineral Tank: |
100123-LC |
1 |
20x54
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels |
Upper
distributor: |
100341 |
1 |
2"
Single point upper SCH80PVC |
Lower
distributor: |
500000-1 |
1 |
Two
point - 2" lower SCH80PVC |
Face
Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-10 |
1 |
2"
Galvanized Flow Control Assembly - 10 gpm |
Media
(Resin / gravel): |
479923 |
1 |
6 ft³
/ 100 lb per vessel |
Rated
continuous / peak flow: |
QVN180S2 |
- |
60 /
90 gpm per vessel |
Capacity: |
CAP180S |
- |
172,000 grains per vessel |
Brine
Tank: |
805076 |
1 |
24X40
Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-1 |
1 |
3/4"
Injector (white) External - Brine line by others |
Brine
Line Assembly: |
806694 |
1 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN150S |
- |
98
1/2" x 59" x 138” |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN180S |
- |
12500
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933570-11 |
|
Model
VN-180-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100123-LC |
2 |
20x54
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels |
Upper
distributor: |
100341 |
2 |
2"
Single point upper SCH80PVC |
Lower
distributor: |
500000-1 |
2 |
Two
point - 2" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-10 |
2 |
2"
Galvanized Flow Control Assembly - 10 gpm |
Media
(Resin / gravel): |
479923 |
2 |
6 ft³
/ 100 lb per vessel |
Rated
continuous / peak flow: |
QVN180T2 |
- |
60 /
90 gpm per vessel : 120 / 180 gpm both vessels |
Capacity: |
CAP180T |
- |
172,000 grains per vessel |
Brine
Tank: |
805076 |
1 |
24X40
Accumatic™ Brine System 16" Grid Ht
Brine Draw: 66 lbs Salt Storage 500 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-1 |
1 |
3/4"
Injector (white) External - Brine line by others |
Brine
Line Assembly: |
806694 |
2 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN150T |
- |
98
1/2" x 59" x 138” |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN180T |
- |
12500
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933573 |
|
Model
VN-240-2" Simplex (SX) Water Softener |
Mineral Tank: |
100124-LC |
1 |
24x54
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100341 |
1 |
2"
Single point upper SCH80PVC |
Lower
distributor: |
500000-1 |
1 |
Two
point - 2" lower SCH80PVC |
Face
Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-15 |
1 |
2"
Galvanized Flow Control Assembly - 15 gpm |
Media
(Resin / gravel): |
479926 |
1 |
8 ft³
/ 150 lb per vessel |
Rated
continuous / peak flow: |
QVN240S2 |
- |
80 /
120 gpm per vessel |
Capacity: |
CAP240S |
- |
245,000 grains per vessel |
Brine
Tank: |
805077 |
1 |
24X50
Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-1 |
1 |
3/4"
Injector (white) External - Brine line by others |
Brine
Line Assembly: |
806694 |
1 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN240S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN240S |
- |
1111
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933573-11 |
|
Model
VN-240-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100124-LC |
2 |
24x54
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100341 |
2 |
2"
Single point upper SCH80PVC |
Lower
distributor: |
500000-1 |
2 |
Two
point - 2" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-15 |
2 |
2"
Galvanized Flow Control Assembly - 15 gpm |
Media
(Resin / gravel): |
479926 |
2 |
8 ft³
/ 150 lb per vessel |
Rated
continuous / peak flow: |
QVN240T2 |
- |
80 /
120 gpm per vessel : 160 / 240 gpm both vessels |
Capacity: |
CAP240T |
- |
245,000 grains per vessel : 490,000 grains both vessels |
Brine
Tank: |
805077 |
1 |
24X50
Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-1 |
1 |
3/4"
Injector (white) External - Brine line by others |
Brine
Line Assembly: |
806694 |
2 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN240T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN240T |
- |
2165
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933576 |
|
Model
VN-300-2" Simplex (SX) Water Softener |
Mineral Tank: |
100125-LC |
1 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-25 |
1 |
2"
Galvanized Flow Control Assembly - 25 gpm |
Media
(Resin / gravel): |
479927 |
1 |
10 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN300S2 |
- |
94 /
124 gpm per vessel |
Capacity: |
CAP300S |
- |
293,000 grains per vessel |
Brine
Tank: |
805077 |
1 |
24X50
Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-3 |
1 |
3/4"
Injector (blue) External - Brine line by others |
Brine
Line Assembly: |
806694 |
1 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN300S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN300S |
- |
1514
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933576-11 |
|
Model
VN-300-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100125-LC |
2 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-25 |
2 |
2"
Galvanized Flow Control Assembly - 25 gpm |
Media
(Resin / gravel): |
479927 |
2 |
10 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN300T2 |
- |
94 /
124 gpm per vessel : 188 / 248 gpm both vessels |
Capacity: |
CAP300T |
- |
293,000 grains per vessel : 586,000 grains both vessels |
Brine
Tank: |
805077 |
1 |
24X50
Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-3 |
1 |
3/4"
Injector (blue) External - Brine line by others |
Brine
Line Assembly: |
806694 |
2 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN300T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN300T |
- |
2971
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933578 |
|
Model
VN-450-2" Simplex (SX) Water Softener |
Mineral Tank: |
100125-LC |
1 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-25 |
1 |
2"
Galvanized Flow Control Assembly - 25 gpm |
Media
(Resin / gravel): |
479928 |
1 |
15 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN450S2 |
- |
92 /
124 gpm per vessel |
Capacity: |
CAP450S |
- |
432,000 grains per vessel |
Brine
Tank: |
805177 |
1 |
30X50
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN450S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN450S |
- |
1832
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933578-11 |
|
Model
VN-450-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100125-LC |
2 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-25 |
2 |
2"
Galvanized Flow Control Assembly - 25 gpm |
Media
(Resin / gravel): |
479928 |
2 |
15 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN450T2 |
- |
92 /
124 gpm per vessel : 184 / 248 gpm both vessels |
Capacity: |
CAP450T |
- |
432,000 grains per vessel : 864,000 grains both vessels |
Brine
Tank: |
805177 |
1 |
30X50
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Brine
Line Assembly: |
806696 |
2 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN450T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN450T |
- |
3554
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933580 |
|
Model
VN-600-2" Simplex (SX) Water Softener |
Mineral Tank: |
100127-LC |
1 |
36x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-35 |
1 |
2"
Galvanized Flow Control Assembly - 35 gpm |
Media
(Resin / gravel): |
479929 |
1 |
20 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN600S2 |
- |
94 /
124 gpm per vessel |
Capacity: |
CAP600S |
- |
594,000 grains per vessel |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN600S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN600S |
- |
2427
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933580-11 |
|
Model
VN-600-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100127-LC |
2 |
36x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-35 |
2 |
2"
Galvanized Flow Control Assembly - 35 gpm |
Media
(Resin / gravel): |
479929 |
2 |
20 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN600T2 |
- |
94 /
124 gpm per vessel : 188 / 248 gpm both vessels |
Capacity: |
CAP600T |
- |
594,000 grains per vessel : 1,188,000 grains both vessels |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Brine
Line Assembly: |
806696 |
2 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN600T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN600T |
- |
4698
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933582 |
|
Model
VN-750-2" Simplex (SX) Water Softener |
Mineral Tank: |
100128-LC |
1 |
36x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-35 |
1 |
2"
Galvanized Flow Control Assembly - 35 gpm |
Media
(Resin / gravel): |
479930 |
1 |
25 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN750S2 |
- |
98 /
130 gpm per vessel |
Capacity: |
CAP750S |
- |
731,000 grains per vessel |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN750S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN750S |
- |
2782
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933582-11 |
|
Model
VN-750-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100128-LC |
2 |
36x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-35 |
2 |
2"
Galvanized Flow Control Assembly - 35 gpm |
Media
(Resin / gravel): |
479930 |
2 |
25 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN750T2 |
- |
98
/130 gpm per vessel : 196 / 260 gpm both vessels |
Capacity: |
CAP750T |
- |
731,000 grains per vessel : 1,462,000 grains both vessels |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Brine
Line Assembly: |
806696 |
2 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN750T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN750T |
- |
5399
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933584 |
|
Model
VN-900-2" Simplex (SX) Water Softener |
Mineral Tank: |
100129-LC |
1 |
42x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100344 |
1 |
3"
Four point upper SCH80PVC |
Lower
distributor: |
500000-5 |
1 |
Six
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
1 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-50 |
1 |
2"
Galvanized Flow Control Assembly - 50 gpm |
Media
(Resin / gravel): |
479931 |
1 |
30 ft³
/ 500 lb per vessel |
Rated
continuous / peak flow: |
QVN900S2 |
- |
101 /
132 gpm per vessel |
Capacity: |
CAP900S |
- |
837,000 grains per vessel |
Brine
Tank: |
805179 |
1 |
42X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 274 lbs Salt Storage 2,400 lbs |
Brine
Valve: |
706055 |
1 |
1"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-4 |
1 |
1"
542-2 Injector (white) External - Brine line by others |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN900S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN900S |
- |
3402
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933584-11 |
|
Model
VN-900-2"-TA Twin Alternating Water Softener |
Mineral Tank: |
100129-LC |
2 |
42x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100344 |
2 |
3"
Four point upper SCH80PVC |
Lower
distributor: |
500000-5 |
2 |
Six
point - 3" lower SCH80PVC |
Face
Piping: |
806722 |
2 |
2"
Grooved Galvanized Sch 40 Steel Piping with Five 2" Grooved 235 psi Cast
Iron Diaphragm Valves |
Backwash Flow Control |
320146-G-50 |
2 |
2"
Galvanized Flow Control Assembly - 50 gpm |
Media
(Resin / gravel): |
479931 |
2 |
30 ft³
/ 500 lb per vessel |
Rated
continuous / peak flow: |
QVN900T2 |
- |
101 /
132 gpm per vessel : 202 / 264 gpm both vessels |
Capacity: |
CAP900T |
- |
837,000 grains per vessel : 1,674,000 grains both vessels |
Brine
Tank: |
805179 |
1 |
42X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 274 lbs Salt Storage 2,400 lbs |
Brine
Valve: |
706055 |
1 |
1"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-4 |
1 |
1"
542-2 Injector (white) External - Brine line by others |
Brine
Line Assembly: |
806696 |
2 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN900T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN900T |
- |
6629
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933610 |
|
Model
VN-300-3" Simplex (SX) Water Softener |
Mineral Tank: |
100125-LC |
1 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW25VN |
1 |
25 gpm
BW control
with 2" drain |
Media
(Resin / gravel): |
479927 |
1 |
10 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN300S3 |
- |
100 /
150 gpm per vessel |
Capacity: |
CAP300S |
- |
293,000 grains per vessel |
Brine
Tank: |
805077 |
1 |
24X50
Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-3 |
1 |
3/4"
Injector (blue) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
1 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
1 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806694 |
1 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN300S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN300S |
- |
1514
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933610-11 |
|
Model
VN-300-3"-TA Twin Alternating Water Softener |
Mineral Tank: |
100125-LC |
2 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW25VN |
1 |
25 gpm
BW control
with 2" drain |
Media
(Resin / gravel): |
479927 |
2 |
10 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN300T3 |
- |
100 /
150 gpm per vessel : 200 / 300 gpm both vessels |
Capacity: |
CAP300T |
- |
293,000 grains per vessel : 586,000 grains both vessels |
Brine
Tank: |
805077 |
1 |
24X50
Accumatic™ Brine System 21" Grid Ht
Preset Brine Draw: 91 lbs Salt Storage 640 lbs |
Brine
Valve: |
706022 |
1 |
⅜”
Brine Valve |
Brine
Injector Assembly: |
320400-3 |
1 |
3/4"
Injector (blue) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
2 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
2 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806694 |
1 |
3/4"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Flow
Meter: |
500863 |
1 |
PW300
3” Paddle Wheel Flow Meter 20-470 gpm |
Dimensions (HtxDepthxWidth): |
DIMVN300T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN300T |
- |
2971
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933598 |
|
Model
VN-450-3" Simplex (SX) Water Softener |
Mineral Tank: |
100125-LC |
1 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW25VN |
1 |
25 gpm
BW control
with 2" drain |
Media
(Resin / gravel): |
479928 |
1 |
15 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN450S3 |
- |
150 /
225 gpm per vessel |
Capacity: |
CAP450S |
- |
432,000 grains per vessel |
Brine
Tank: |
805177 |
1 |
30X50
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
1 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
1 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN450S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN450S |
- |
1832
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933598-11 |
|
Model
VN-450-3"-TA Twin Alternating Water Softener |
Mineral Tank: |
100125-LC |
2 |
30x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW25VN |
1 |
25 gpm
BW control
with 2" drain |
Media
(Resin / gravel): |
479928 |
2 |
15 ft³
/ 250 lb per vessel |
Rated
continuous / peak flow: |
QVN450T3 |
- |
150 /
225 gpm per vessel : 300 / 450 gpm both vessels |
Capacity: |
CAP450T |
- |
432,000 grains per vessel : 864,000 grains both vessels |
Brine
Tank: |
805177 |
1 |
30X50
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 145 lbs Salt Storage 900 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
2 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
2 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Flow
Meter: |
500863 |
1 |
PW300
3” Paddle Wheel Flow Meter 20-470 gpm |
Dimensions (HtxDepthxWidth): |
DIMVN450T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN450T |
- |
3554
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933606 |
|
Model
VN-600-3" Simplex (SX) Water Softener |
Mineral Tank: |
100127-LC |
1 |
36x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW35VN |
1 |
35 gpm
internl BW control
with 1 1/2" drain |
Media
(Resin / gravel): |
479929 |
1 |
20 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN600S3 |
- |
200 /
287 gpm per vessel |
Capacity: |
CAP600S |
- |
594,000 grains per vessel |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
1 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
1 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN600S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN600S |
- |
2427
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933606-11 |
|
Model
VN-600-3"-TA Twin Alternating Water Softener |
Mineral Tank: |
100127-LC |
2 |
36x60
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW35VN |
1 |
35 gpm
internl BW control
with 1 1/2" drain |
Media
(Resin / gravel): |
479929 |
2 |
20 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN600T3 |
- |
200 /
287 gpm per vessel : 400 / 574 gpm both vessels |
Capacity: |
CAP600T |
- |
594,000 grains per vessel : 1,188,000 grains both vessels |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
2 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
2 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Flow
Meter: |
500863 |
1 |
PW300
3” Paddle Wheel Flow Meter 20-470 gpm |
Dimensions (HtxDepthxWidth): |
DIMVN600T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN600T |
- |
4698
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933602 |
|
Model
VN-750-3" Simplex (SX) Water Softener |
Mineral Tank: |
100128-LC |
1 |
36x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
1 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
1 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW35VN |
1 |
35 gpm
internl BW control
with 1 1/2" drain |
Media
(Resin / gravel): |
479930 |
1 |
25 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN750S3 |
- |
209 /
280 gpm per vessel |
Capacity: |
CAP750S |
- |
731,000 grains per vessel |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
1 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
1 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN750S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN750S |
- |
2782
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933602-11 |
|
Model
VN-750-3"-TA Twin Alternating Water Softener |
Mineral Tank: |
100128-LC |
2 |
36x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100343 |
2 |
3"
Single point upper SCH80PVC |
Lower
distributor: |
500000-3 |
2 |
Four
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW35VN |
1 |
35 gpm
internl BW control
with 1 1/2" drain |
Media
(Resin / gravel): |
479930 |
2 |
25 ft³
/ 350 lb per vessel |
Rated
continuous / peak flow: |
QVN750T3 |
- |
209 /
280 gpm per vessel : 418 / 560 gpm both vessels |
Capacity: |
CAP750T |
- |
731,000 grains per vessel : 1,462,000 grains both vessels |
Brine
Tank: |
805178 |
1 |
39X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 244 lbs Salt Storage 2000 lbs |
Brine
Valve: |
706044 |
1 |
1/2"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-2 |
1 |
1"
Injector (red) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
2 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
2 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Flow
Meter: |
500863 |
1 |
PW300
3” Paddle Wheel Flow Meter 20-470 gpm |
Dimensions (HtxDepthxWidth): |
DIMVN750T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN750T |
- |
5399
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933604 |
|
Model
VN-900-3" Simplex (SX) Water Softener |
Mineral Tank: |
100129-LC |
1 |
42x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100344 |
1 |
3"
Four point upper SCH80PVC |
Lower
distributor: |
500000-5 |
1 |
Six
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW50 |
1 |
50 gpm
2" external BW control
with 1 1/2" drain |
Media
(Resin / gravel): |
479931 |
1 |
30 ft³
/ 500 lb per vessel |
Rated
continuous / peak flow: |
QVN900S3 |
- |
222 /
293 gpm per vessel |
Capacity: |
CAP900S |
- |
837,000 grains per vessel |
Brine
Tank: |
805179 |
1 |
42X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 274 lbs Salt Storage 2,400 lbs |
Brine
Valve: |
706055 |
1 |
1"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-4 |
1 |
1"
542-2 Injector (white) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
1 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
1 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
1 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN900S |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN900S |
- |
3402
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933604-11 |
|
Model
VN-900-3" Twin Alternating (TA) Water Softener |
Mineral Tank: |
100129-LC |
2 |
42x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100344 |
2 |
3"
Four point upper SCH80PVC |
Lower
distributor: |
500000-5 |
2 |
Six
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW50 |
2 |
50 gpm
2" external BW control
with 1 1/2" drain |
Media
(Resin / gravel): |
479931 |
2 |
30 ft³
/ 500 lb per vessel |
Rated
continuous / peak flow: |
QVN900T3 |
- |
222 /
293 gpm per vessel : 444 / 586 gpm both vessels |
Capacity: |
CAP900T |
- |
837,000 grains per vessel : 1,674,000 grains both vessels |
Brine
Tank: |
805179 |
1 |
42X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 274 lbs Salt Storage 2,400 lbs |
Brine
Valve: |
706055 |
1 |
1"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-4 |
2 |
1"
542-2 Injector (white) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
2 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
2 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806696 |
2 |
1"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Flow
Meter: |
500863 |
1 |
PW300
3” Paddle Wheel Flow Meter 20-470 gpm |
Dimensions (HtxDepthxWidth): |
DIMVN900T |
- |
114" x
78" x 276" |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN900T |
- |
6629
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
|
Part
No |
Quant |
Description |
System: |
933000 |
|
Model
VN-1200-3" Simplex (SX) Water Softener |
Mineral Tank: |
100130-LC |
1 |
48x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100345 |
1 |
4"
Four point upper SCH80 PVC |
Lower
distributor: |
500000-5-4 |
1 |
Six
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW60VN |
1 |
60 gpm
2" external BW control
with 2" drain |
Media
(Resin / gravel): |
479932 |
1 |
40 ft³
/ 1100 lb per vessel |
Rated
continuous / peak flow: |
QVN1200S3 |
- |
XXX /
YYY gpm per vessel |
Capacity: |
CAP1200S |
- |
1,170,000 grains per vessel |
Brine
Tank: |
805169 |
1 |
50X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 388 lbs Salt Storage 3,300 lbs |
Brine
Valve: |
706066 |
1 |
1 1/4"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-10 |
1 |
1 1/2"
544-2 Injector (white) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
1 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
1 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806692 |
1 |
1 1/2"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707310 |
1 |
VN SX
Controller w/ ERCt & MPV1 Stager |
Dimensions (HtxDepthxWidth): |
DIMVN1200S |
- |
98
1/2" x 59" x 138” |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN1200S |
- |
5700
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
SXVN |
- |
|
Standard single unit (simplex) shall be controlled by a 99-day
electronic timer (the ERCt) and a stager. The timer shall be mounted on
the NEMA 4 fiberglass control box with the stager and shall initiate
regeneration at certain, preset times. Manual regeneration shall be
available at the stager. |
|
Part
No |
Quant |
Description |
System: |
933000-11 |
|
Model
VN-1200-3"-TA Twin Alternating Water Softener |
Mineral Tank: |
100130-LC |
2 |
48x72
Carbon steel, epoxy lined and coated, 100-psi, non-code vessels
|
Upper
distributor: |
100345 |
2 |
4"
Four point upper SCH80 PVC |
Lower
distributor: |
500000-5-4 |
2 |
Six
point - 3" lower SCH80PVC |
Face
Piping: |
PIPEGRV |
1 |
Grooved or NPT GALV SCH 40 Iron |
Backwash Rate: |
BW60VN |
1 |
60 gpm
2" external BW control
with 2" drain |
Media
(Resin / gravel): |
479932 |
2 |
40 ft³
/ 1100 lb per vessel |
Rated
continuous / peak flow: |
QVN1200T3 |
- |
274 /
364 gpm per vessel : 548 / 728 gpm both vessels |
Capacity: |
CAP1200T |
- |
1,170,000 grains per vessel : 2,340,000 grains both vessels |
Brine
Tank: |
805169 |
1 |
50X60
Accumatic™ Brine System 24" Grid Ht
Brine Draw: 388 lbs Salt Storage 3,300 lbs |
Brine
Valve: |
706066 |
1 |
1 1/4"
Brine Valve - PVC Sch 80 |
Brine
Injector Assembly: |
320400-10 |
1 |
1 1/2"
544-2 Injector (white) External - Brine line by others |
Inlet
Outlet Valves: |
806933 |
2 |
Inlet
and Outlet Vavles - Two @ Three inch (3") grooved cast iron polyethylene
lined DV300G inlet and outlet valves rated at 235 psi |
BW,
Drain Rinse Vavle Assy: |
806783 |
2 |
Three
@ Two inch (2") grooved cast iron polyethylene lined DV200G backwash
drain and rinse valves rated at 235 psi with grooved piping for systems
with brine distributor |
Brine
Line Assembly: |
806692 |
2 |
1 1/2"
includes diaphragm valve, check and ball valves with piping |
Controller: |
707312 |
1 |
VN TA
Controller w/ ERCd & MPV3 Stager |
Flow
Meter: |
500863 |
1 |
PW300
3” Paddle Wheel Flow Meter 20-470 gpm |
Dimensions (HtxDepthxWidth): |
DIMVN1200T |
- |
98
1/2" x 59" x 138” |
- |
ADDVN |
- |
Add
one foot to height for loading media. |
Shipping Weight: |
WTVN1200T |
- |
10100
lbs |
Literature: |
LITVN1 |
- |
CAT250 |
Conditions: |
OPCONDVN |
- |
Maximum temperature shall be 100°F. Pressure shall be 25 to 100 psi. |
Operating Mode: |
TAVN |
- |
|
Twin
Alternating (- TA). In twin alternating (TA) mode units operate so that
once a predetermined amount of water has passed through the flow meter
the EDRd initiates regeneration of the exhausted unit placing its twin
in service. One unit is on line (in service) and one is either in
standby or regeneration. Twin alternating systems shall have two mineral
tanks, two sets of valves, one stager, one brine tank with brine
director, one ERCd controller, one PW, PWS or TM series flow meter and
two shut off kits. Regeneration initiation and meter display shall be
provided by the ERCd. The controller shall be in a NEMA 4 fiberglass
enclosure. The controller shall be fully electronic with no mechanical
or electromechanical timers. |
Specifications
Mineral Tank (Standard Non Code Vessels).
The non-code vessel shall be A36 carbon
steel or better rated at 100 psi working pressure designed to a factor
of safety of 3.0.
Mineral Tank (Optional Code Vessels).
ASME code stamped tanks shall be available.
Tank shall be clearly specified as code or non-code with a specified
working pressure. Tanks “built to ASME code but not stamped” shall not
be acceptable as ASME code. An ASME U1 form shall be provided with each
ASME code tank.
Coating and lining.
Tanks
shall be prepared for internal and external coating with a SPCC 11 near
white sand blast. Internal and external coating shall be two 3 - 4 mill
coats of white Series 20 Tnemic Epoxy. Paint shall be applied according
to manufacturer’s recommendations.
Internals.
The
bottom distributor shall be a multipoint system using 2½” Ø single point
molded distributor heads with 2½” of slotted length and a 1½ inch NPT
female threaded connection. The
slots shall be .012" - .016" wide to retain mineral and the total slot
area shall be equal to or larger than the unit pipe size.
A top dome splash distributor
with an opening equal to or larger than the unit pipe size shall be
installed in the mineral tank.
The internal distributor piping shall be SCH 80 PVC.
Face Piping.
The piping connecting the tank to the tank adaptor and valve shall be
SCH 40 galvanized steel pipe with NPT or Gruvlok fittings.
Media.
The resin shall be sodium form polystyrene 8% divinyl benzene cross
linked resin with clear spherical beads. Resin beads shall be 16-50 US
Standard Mesh with a particle size range of 0.3 to 1.2 mm. The resin
shall be clean and packaged in sealed plastic bags weighing 55 lbs or
less. Underbedding shall be #20
graded
washed flint gravel sieved between 1/8” and 1/16”.
Valves.
The
valves shall be Water King DMB Series cast iron body valves with grooved
connections. The valve can be operated by air or water. The diaphragm
shall be preformed, nylon fabric reinforced natural rubber. Internal
parts shall be stainless steel and brass. Working pressure on the valve
is 230 psi with maximum temperature of 175oF.
Stager.
Diaphragm valves shall be operated by a
rotary pilot valve (stager) with multiple ports through which control
fluid is directed, thereby operating the diaphragm valves installed in a
process system. Standard units shall use stagers constructed of
durable, non-corroding, self-lubricating material for long, maintenance
free life. The stager shall function by opening and closing its ports,
singly or in combination, in a sequence that accomplishes the five
cycles of softening. The stager shall use either water or air for the
operating fluid. Process fluid, if pressurized, and not damaging to the
internal parts of the stager or diaphragm valve, may be drawn from the
main line to the inlet of the stager. Otherwise, an independent source
of control fluid is required. The pressure of the control fluid must be
equal to or greater than the line pressure of the system. The stager
enclosure shall be a 10” x 8” x 6” NEMA 4 fiberglass control box which
houses both the stager and the timer. Maximum pressure shall be 100 psi
with a maximum temperature rating of 150oF. Ports are 1/8”
NPT. Power shall be either 120 VAC/60 Hz or 230 VAC/50 Hz. Flexible
tubing (¼” O.D.) shall connect stager ports to diaphragm valves.
Brine System.
The brine system shall be of the Accumaticä
high grid plate design. The brine tank shall be blow molded or
rotationally molded HDPE, including a cover. The system shall include a
SCH 80 PVC float operated brine valve to control refill shut-off and
refill flow rate. Brine volume is to be repeatedly accurate within 10%
and not dependent on salt bed void space for brine volume. Brine draw is
to volumetrically controlled, not timed.
Operating Conditions.
Maximum temperature shall be
100°F.
Pressure shall be 25 to 100 psi.
External Ejectors.
Brine
shall be drawn directly into inlet of the mineral tank using an EE
series external ejector. This venturi type device shall be SCH 80 PVC
with ¾”, or 1” FNPT connections. The venturi shall be chemically bonded
to the housing. The venturi shall be precision machined. Maximum
temperature shall be 140°F.
The external injector shall provide both brine flow and brine dilution.
Simplex.
Simplex
systems shall consist of one mineral tank with attached valve nest and
one brine tank. Simplex systems shall be controlled using the ERCt
99-day electronic timer and an MPV1 stager both housed in a single NEMA
4 enclosure. Regeneration shall be initiated at preset times of the
day. Manual regeneration shall be available at the stager.
Twin.
Twin
systems shall consist of two mineral tanks with attached valve nest and
one brine tank with a brine director. Twin systems shall be controlled
using the ERCt 99-day electronic timer and two MPV1 stagers all housed
in a single NEMA 4 enclosure. Regeneration shall be initiated at preset
times of the day. Softeners run in parallel and are out of service only
during regeneration. Simultaneous regeneration is prevented by setting
different regeneration times for each unit. Manual regeneration shall be
available at the stager.
Twin Alternating Demand Initiation.
Twin alternating systems shall consist of two mineral tanks with
attached valve nest and one brine tank with a brine director. Twin
alternating systems shall be controlled using the ERCd electronic
controller and an MPV3 stager housed in a single NEMA 4 enclosure.
Regeneration shall be initiated
based on the total quantity of water treated by the softener.
One softener is in service and one in regeneration or standby. Manual
regeneration shall be available at the stager. Twin alternating systems
provide a continuous flow of softened water with no bypassing of
unsoftened water during regeneration.
Multiple Tank Demand Initiation.
Regeneration shall be initiated
based on the total quantity of water treated by the softener. For pipe
sizes 3” and below, the VN Series uses PW series flow meters with the
ERCd controller, and MPV 1 or MPV3 stager. For 4” and 6” and larger
piping the VN series uses the PW 400S and 600S saddle mounted flow
meters with the WK520-84 controller, stagers and ARC cycle timers.
Twin alternating systems provide a continuous flow of softened water
with no bypassing of unsoftened water during regeneration.
Other items.
A standard soft water soap test kit shall be provided. A complete set of
instructions, including installation, loading, start-up, adjustments,
servicing, and a parts list shall be provided with the equipment.
Flow Meters.
For pipe
sizes 3” and below, the VN Series uses PW series flow meters with the
ERCd controller. For 4” and 6” piping the VN series uses the PW 400S
and 600S saddle mounted flow meters with the ERCd controller.
Qualifications.
A
company that has continuously fabricated water softeners for at least 10
years shall construct the equipment.
Pressure gauge and test tap kit.
A
kit containing two liquid filled, stainless steel pressure gauges with 2
½” Ø face, two brass ball valve sample taps with hose barb connections
and associated brass connection fittings shall be provided for mounting
in the 1/4" FNPT predrilled and tapped ports in the inlet and outlet
diaphragm valves. |
|
|