The Accumaticä
brine system consists of a brine tank and an internal or
external brine ejector (also called a throat and nozzle assembly)
mounted inside the Task Master IIIä
or Task Masterä
– 2 or 2-½ inch valve or mounted externally as part of a valve nest.
Inside the brine tank is a brine valve, a protective housing called
a brine well, and a salt platform.
Features
·
Made from Pipe.
The
Accumaticä brine valve is available in ⅜, ½, ¾”, 1”
and
1¼”
sizes. All sizes are constructed of heavy duty Sch.80 PVC. The sizes are
I.D. as in pipe size, not O.D. as in tubing size. Our
⅜”
ID brine valve is the same size as other ½” O.D. valves. The Accumatic
brine valve is made from pipe, not tubing.
·
Very precise measurement of brine.
The Accumaticä
valve provides accurate volumetric control of brine draw. The same
amount is drawn every time. The voids of the salt do not affect the
brine draw.
·
Brine check
in brine valve prevents air draw into mineral tank.
·
Positive pressure
is applied to seat the brine valve to prevent brine contamination during
the service cycle.
·
Standard systems
have a fixed brine float which is factory preset at a brine draw which
works for the system. Brine draw can be adjustable by adding the
optional adjustable brine float.